Komatsu — Securing machine

3.4 Transportation Operation Loading 1. Load and unload on firm level ground only. Maintain a safe distance from the edge of a road. 2. Apply the brakes on the trailer securely and insert blocks under the tires to ensure that the trailer does not move. Then fix the ramps in line with the centers of the trailer and the machine. Be sure that the two sides are at the same height as one another. Ramp Blocks Make the angle of the ramps a maximum of 15є. Distance between ramps Max. 15° Block Set the distance between the ramps to match the center of the tires. GK032225 If the ramp sags appreciably, reinforce it with blocks, etc. 3. Determine the direction of the ramp, then slowly load the machine.

4. Load the machine correctly in the specified position on the trailer. Securing machine Load the machine on to a trailer as follows. 1. Lower the work equipment slowly. 2. Check that the work equipment control lever is at the HOLD position, then set the safety lock lever to the LOCK position. Free Lock GK038007 3. Set the parking brake switch to ON position (A) to apply the parking brake securely. 4. Turn the starting switch to the OFF position to stop the engine, and pull out the starting switch key. 3-150 WA470-6H – VEAM946100 OFF ON GK038008