Komatsu — 4.4 Fuel, coolant and lubricants

4.4 Fuel, coolant and lubricants Wear parts list Maintenance 4.4 Fuel, coolant and lubricants ! KOMATSU genuine oils are adjusted to maintain the reliabil- ity and durability of KOMATSU construction equipment and components. ! In order to keep your machine in the best conditioner for long periods of time, it is essential to follow the instructions in this Operation and Maintenance Manual. ! Failure to follow these recommendations may result in short- ened life or excess wear of the engine, power train, cooling system, and/or other components. ! Commercially available lubricant additives may be good for the machine, but they may also cause harm.

KOMATSU does not recommend any commercially available lubricant additive. ! Use the oil recommended according to the ambient temper- ature in the chart below. ! Specified capacity means the total amount of oil including the oil in the tank and the piping. Refill capacity means the amount of oil needed to refill the system during inspection and maintenance. ! When starting the engine in temperatures below 0°C, be sure to use the recommended multi-grade oil, even if the ambient temperature may become higher during the course of the day. ! If the machine is operated at a temperature below -20°C, a separate device is needed, so consult your KOMATSU dis- tributor. !

When the fuel sulfur content is less than 0.2%, change the engine oil according to the period inspection table given in this Operation and Maintenance Manual. If the fuel sulfur content is more than 0.2%, change the oil according to the following table. * If using these fuels, serious troubles may occur because of early deterioration of engine oil or early wear of engine internal parts. If using them by necessity for local situations, be sure to inform customers about the following. 4-16 WA470-6H – VEAM946100 Fuel sulfur content (%) Engine oil change interval 0.2 - 0.5 250 hours 5.0 and up Not recommendable (*)