Komatsu — Selection and inspection of tires

4.9 Service procedure When required Maintenance Check inflation pressure of tires When inflating a tire, check that no one will enter the working area. Use an air chuck which has a clip and which can be fixed to the air valve. While inflating the tire, check the inflation pressure occasionally so that it will not rise too high. If the rim is not fitted normally, it may be broken and scattered while the tire is inflated. To ensure safety, place a guard around the tire and do not work in front of the rim but work on the tread side of the tire. Abnormal drop of inflation pressure and abnormal fitting of the rim indicate trouble in the tire or rim.

In this case, be sure to ask a tire repair shop to carry out repairs. Be sure to observe the specified inflation pressure. Do not adjust the inflation pressure of the tires just after high- speed travel or heavy-duty work. GK032085 Check Measure the inflation pressure with a tire pressure gauge while the tires are cool before starting work. Inflation of tires Adjust the inflation pressure properly. When inflating a tire, use an air chuck which can be fixed to the air valve of the tire as shown in the figure. Do not work in front of the rim but work on the tread side of the tire. The proper inflation pressure is shown below.

NOTE The optimum inflation pressure differs according to the type of work. For details, see "Handling the tires (3-146)". 4-54 WA470-6H – VEAM946100 WARNING WARNING Tire size Inflation pressure Standard 26.5-25 Front Tire: 450 kPa Rear Tire: 350 kPa Option 26.5-25-16PR Front Tire: 340 kPa Rear Tire: 275 kPa 26.5-25-20PR Front Tire: 340 kPa Rear Tire: 290 kPa 23.5-25-20PR Front Tire: 490 kPa Rear Tire: 340 kPa