4.9 Service procedure Every 250 hours service Maintenance Adjusting 1. Loosen bolts and nuts (1), (2), (3), and (4). 5 4 2. Turn nut (5) clockwise and move alternator (6) so that the deflection of the belt is approx. 13 mm (approx. 59N). 2 3 3. Tighten bolts and nuts (1), (2), (3), and (4) to hold alternator (6) in position. 6 1 ! Check each pulley for damage, wear of the V-groove, and wear of the V-belt. In particular, be sure to check that the V- belt is not touching the bottom of the V-groove. NOTE GK047042 ! In case any of the following occurs, ask the KOMATSU dis- tributor in your territory to replace the belts with new ones.
The fan belt has elongated, leaving little allowance for adjustment. A cut or crack is found on the belt. Slipping or creaking sound is heard coming from the belt. ! When the new V-belt is set, readjust it after one hour of oper- ation. 4-62 WA470-6H – VEAM946100