4.9 Service procedure Maintenance Every 2000 hours service Change axle oil ! When changing the oil, apply the parking brake and secure the front and rear frames with the safety bar. ! After the engine is stopped, the parts and oil are at high tem- perature, and may cause burns. Wait for the temperature to go down before starting the operation. ! When the plug is removed, oil may spurt out, so turn it slowly to release the internal pressure, then remove it carefully. Refill capacity front: 60 liters Refill capacity rear: 56 liters ! A: Front A ! B: Rear 1. Set a container to catch the oil under drain plug (P). 2.
Remove front and rear oil filler plugs (1), then remove drain plug (P) to drain the oil. 1 REMARK Remove the mud and dirt from around plug (1), then remove the plug. P GK043210 3. After draining the oil, clean drain plug (P) and install it again. B 4. Add axle oil through plug hole (1) at the refill level. 1 REMARK For axles with ASD (Limited-Slip Differential), the brand of lubri- cating oil is different, so always use the specified lubricating oil. 5. After adding oil, check at level plug (1) that the oil is at the specified level. P For details, see "Check axle oil level, add oil (4-40)".
GK043211 REMARK For operations where the brake is used frequently, change the axle oil at shorter intervals. WA470-6H – VEAM946100 4-81 WARNING WARNING