Technical Data 5.3 Vibration level 5.3 Vibration level When used for its intended purpose, levels of vibration for the earthworking machine transmitted from the operator's seat are lower or equal to the test vibrations for the relative machinery class in compliance with ISO 7096. The actual accelaration value of the upper limbs is less than 2.5 m/sІ. The actual acceleration value for the body is less than 0.5 m/sІ. These values were determined using a representative machine and measured during the typical operating condition indicated below according to the measurement procedures that are defined in the standards ISO 2631/1 and ISO 5349. Operating condition:
V-shape loading Guide to reduce vibration levels on machine The following guides can help an operator of this machine to reduce the whole body vibration levels: 1. Use the correct equipment and attachments. 2. Maintain the machine according to this manual " Tire pressures (for wheeled machines), tension of crawler (for crawler machines) " Brake and steering systems " Controls, hydraulic system and linkages 3. Keep the terrain where the machine is working and traveling in good condition " Remove any large rocks or obstacles " Fill any ditches and holes " Site manager should provide machine operators with machine and schedule time to maintain terrain condi- tions 4.
Use a seat that meets ISO 7096 and keep the seat main- tained and adjusted " Adjust the seat and suspension for the weight and size of the operator " Wear seat belt " Inspect and maintain the seat suspension and adjust- ment mechanisms 5. Steer, brake, accelerate, shift gears (for wheeled machines), and move the attachment levers and pedals slowly so that the machine moves smoothly WA470-6H – VEAM946100 5-5