Komatsu — 6.2 Handling torque converter lock-up

Attachments, Options 6.2 Handling torque converter lock-up 6.2 Handling torque converter lock-up When traveling down slopes of a grade of more than 6°, never depress the accelerator pedal fully, regardless of whether the torque converter lock-up switch is ON or OFF. It is extremely dangerous to drive too fast. The travel speed shown in this section is the value when the tire size is 26.5-R25. The travel speed when the tire size is 23.5-20 is shown in { }. The travel speed is subject to the using condition and road con- dition. NOTE ! To prevent overrunning when traveling at high speed in the following cases, do not shift down gear. !

When traveling in F3 at a speed of more than 20 km/h {18 km/h}, do not shift down to F2. ! When traveling in F4 at a speed of more than 30 km/h {28 km/h}, do not shift down to F3. When the actual speed range is 3rd or 4th in either FORWARD or REVERSE, the torque converter lock-up function is actuated according to the travel speed and sets to direct drive. To prevent overrun, the lock-up is automatically canceled to pre- vent the travel speed from going above 40 km/h {36.9 km/h}. WA470-6H – VEAM946100 6-3 WARNING WARNING