Komatsu — 6.4.3 Operation method of joystick steering system

6.4 Joystick steering system Attachments, Options 3. Operate the joystick in direction (b) to turn the machine to the right; operate it in direction (a) to turn the machine to the left. a b N The greater the angle of operation, the faster the articulating speed becomes. GK043185 4. It is possible to switch the articulating speed with the HI/ LOW selector switch. Select the speed to match the operation. 5. When the machine has articulated to the desired angle, return the joystick to the N position. The joystick will return automatically to the N position. a b 6.

To return the direction of travel of the machine so that it trav- els in a straight line, operate the joystick in the opposite direction from the N position (for example, when the machine is articulated to the right, operate the joystick to the left). GK043187 7. Use the FNR switch at the top of the joystick lever to set the transmission to the direction of travel. 1 N position: NEUTRAL 2 F position: FORWARD R position: REVERSE REMARK If the position of the directional lever and the FNR switch are dif- ferent, the joystick pilot lamp flashes, the warning lamp lights up, and the alarm buzzer sounds. At the same time, “E00 SHIFT LEVER NEUTRAL“ is displayed on the character display.

In this condition, the machine will travel in the direction set by the directional lever, so set the directional lever to N. GK043183 8. To change the speed range, use shift up switch (1) or shift down switch (2) on the joystick. 6-18 WA470-6H – VEAM946100