Attachments, Options 6.5 Multi-function lever (with/without auxiliary control lever) 4. Directional selector switch This switch (4) is used to switch the direction of travel of the machine between forward and reverse. F N F Position: FORWARD R N Position: Neutral R Position: REVERSE Before operating this switch, check that the condition is as fol- lows. GK032329 ! Directional lever is at N ! Directional selector switch actuation switch is at ON If the condition is not as above, the switch will not work. 5. Directional selector switch actuation switch When this switch (5) is pressed, the FNR switch on the head of the multi-function lever is activated. a Position (a):
ON The pilot lamp inside the switch and the directional selection pilot lamp on the machine monitor light up, and the FNR switch is activated. b Position (b): OFF GK043252 The FNR switch is not activated. REMARK Turn this switch ON when the directional lever and directional selector switch are at the neutral position. At any other position, this switch does not work. Even if the directional selector switch is functioning, when the directional lever is operated, the operation of the directional lever is given priority. 6. Directional selector pilot lamp This monitor (6) lights up when the directional selector switch actuation switch on the right switch panel is turned ON.
It indi- cates that it is possible to operate the travel direction of the machine with the FNR switch on the head of the multi-function lever. GK043114 WA470-6H – VEAM946100 6-23