Komatsu — 6.6.1 Explanation of components

6.6 3-lever control Attachments, Options 1. Lift arm control lever (3-lever control) b c d This lever (1) is used to operate the lift arm. NOTE Do not use the FLOAT position when lowering the bucket. Use the FLOAT position when leveling, see "Leveling operation (3-134)". a Position (a): RAISE When the lift arm control lever is pulled further from the RAISE position, the lever is stopped in this position until the lift arm reaches the preset position of the kickout, and the lever is returned to the HOLD position. GK043256 Raise Position (b): HOLD The lift arm is kept in the same position. Position (c): LOWER Position (d): FLOAT The lift arm moves freely under external force. Lower GK032142 2.

Bucket control lever (3-lever control) This lever (2) operates the bucket. b c Position (a): TILT a When the bucket control lever is pulled further from the TILT position, the lever is stopped in this position until the bucket reaches the preset position of the positioner, and the lever is returned to the HOLD position. Position (b): HOLD GK043257 The bucket is kept in the same position. Tilt Position (c): DUMP Dump GK032144 6-28 WA470-6H – VEAM946100