Komatsu — 2.3.2 Operation

Safety 2.3 Precautions for operation ! When operating in tunnels, under bridges, under electric wires, or other places where the height is limited, be extremely careful not to let the work equipment hit anything. ! To prevent accidents caused by hitting other objects, always operate the machine at a speed which is safe for operation, particular in confined spaces, indoors, and in places where there are other machines. GK032063 Methods of using brake ! When the machine is traveling, do not rest your foot on the brake pedal. If you travel with your foot resting on the pedal, the brake will always be applied, and this will cause the brakes to overheat and fail. !

Do not depress the brake pedal repeatedly if not necessary. ! When traveling downhill, use the braking force of the engine. If necessary, use the brake pedal at the same time. Operate carefully on snow ! Snow-covered or frozen surfaces are slippery, so be extremely careful when travelling or operating the machine and do not operate the levers suddenly. Even a slight slope may cause the machine to slip, so be particularly careful when working on slopes. ! With frozen ground surfaces, the ground becomes soft when the temperatures rises and this may cause the machine to tip over. ! If the machine enters deep snow, there is a hazard that it may tip over or become buried in the snow.

Be careful not to leave the road shoulder or to get trapped in a snow drift. ! When clearing snow, the road shoulder and and objects placed beside the road are buried in the snow and cannot be seen. There is a hazard of the machine tipping over or hitting covered objects, so always carry out operations carefully. ! When travelling on snow-covered roads, always fit tire chains. ! When travelling on snow covered slopes, never apply the foot brake suddenly. Reduce the speed and use the engine as a brake while applying the foot brake intermittenly (depress the brake intermittenly several times). If nessecary, lower the bucket to the ground to stop the machine. WA470-6H – VEAM946100 2-27