Komatsu — 2.4 Precautions for maintenance

Safety 2.4 Precautions for maintenance Handling high-pressure hoses ! If oil or fuel leaks from high-pressure hoses, there is danger that it may cause fire or defective operation, which may lead to serious injury or fire. If there are any loose hoses or pip- ing, or any leakage of oil or fuel from the hose or piping mount, stop operation and tighten to the specified torque. ! If any damaged hoses are found, stop operations immedi- ately and contact your KOMATSU distributor. ! Replace all hoses every 2 years at the latest. The shelf life of the hose should not exceed 2 years. ! Hoses must be replaced as soon as the following damage is noticeable:

" damage to the outer layer through to the intermediate layer, " brittleness in the outer layer, " distortions in pressurised or unpressurised state not con- forming with the original shape of the installed hose, " leakages, " damage to the hose fittings or to the connection between fittings and hose, " storage damage. ! When replacing the hoses, always replace the O-rings, gas- kets, and other such parts at the same time. ! See "Periodic replacement of safety critical parts (4-25)". Waste materials To prevent pollution, pay careful attention to the method of dis- posing of waste materials. ! Always put oil drained from your machine in containers.

Never drain oil directly onto the ground or dump into the sewage system, rivers, the sea, or lakes. ! Obey appropriate laws and regulations when disposing of harmful objects such as oil, fuel, coolant, solvent, filters, and batteries. GK032083 WA470-6H – VEAM946100 2-41