Operation 3.2 Explanation of components 3.2 Explanation of components The following is an explanation of the devices needed for operat- ing the machine. To carry out suitable operations correctly and safely, it is impor- tant to understand fully the methods of operating the equipment and the meanings of the displays. 3.2.1 Machine monitor F C E C F G F F E B GK038018 D E C E B A E D NOTE When turning the starting switch to the ON position before start- ing the engine, the central warning lamp, caution lamps, and pilot lamps light up for 2 seconds to check the system. After the alarm buzzer sounds for 2 seconds, it goes off if the condition is normal.
The shift indicator display shows “88“ for 2 seconds. The indicator gauges and meters are actuated after the above system check is completed. The character display shows “KOMATSU“ for 3 seconds. If the lamps do not light up, there is probably a failure or discon- nection, so contact your KOMATSU distributor for inspection. WA470-6H – VEAM946100 3-7 A: Character display E: Pilot display B: Emergency stop items F: Meter display C: Caution items G: Central warning lamp D: Inspection and maintenance items