Operation 3.2 Explanation of components Mistaken operation This warning is given if any switch or lever is operated mistak- enly. The central warning lamp on the monitor lights up and the alarm buzzer sounds at the same time. In addition, in the following case, action code “E00“ is displayed on character display (1). ! When the machine has exceeded the travel speed limit. ! When the work equipment lock lever is at the LOCK position and the EPC control lever is at any position other than neu- tral. (Machines equipped with EPC) REMARK The alarm buzzer sounds in a 0.25 second cycle. (0.2 sec. “ON“ -> 0.05 sec.
“OFF“) (The ON and OFF cycles have a different length) Inspection and maintenance This warning is given if it is necessary to carry out inspection and maintenance of wear parts, or if it is necessary to check the oil or cooling water level. The individual caution lamp on the monitor lights up, and at the same time, action code “E01“ is displayed on character display (1). In the case of this warning, the central warning lamp does not light up and the alarm buzzer does not sound. GK038005 1 Central warning lamp This display portion (1) lights up if any emergency stop item, caution item, or mistaken operation of any switch or lever occurs. At the same time, the alarm buzzer sounds.
1 Check the content of the display and carry out the specified action for the item. GK038005 WA470-6H – VEAM946100 3-9