Operation 3.2 Explanation of components 1. Brake oil pressure caution lamp This lamp (1) lights up when the brake oil pressure goes below the specified value. During checks before starting (when the starting switch is turned to the ON position but the engine is not started), the brake circuit is not actuated while the engine is stopped, so the brake oil pressure caution lamp and central warning lamp do not light up and the alarm buzzer does not sound. During operation (engine running) GK032093 If the brake oil pressure goes down during operation, the brake oil pressure caution lamp and central warning lamp light up and the alarm buzzer sounds intermittently.
At the same time, the top line of the character display displays “E03“ and the bottom line displays “CHECK RIGHT NOW“ and “CALL“ alternately for 3 seconds each, so stop the machine immediately in a safe place, stop the engine, and carry out inspection. If the brake oil pressure caution lamp lights up, the footbrake may not work, so keep the parking brake applied to prevent the machine from moving. In addition, when the accumulator is being charged immediately after starting the engine, the brake oil pressure caution lamp will light up, but the central warning lamp remains OFF and the alarm buzzer does not sound.
Keep the parking brake applied to prevent the machine from moving until the brake pressure becomes normal and the brake oil pressure caution lamp goes out. 2. Engine oil pressure caution lamp This lamp (2) lights up to warn the operator that the engine lubri- cating oil pressure has dropped. During checks before starting (starting switch at the ON position, engine stopped) the lamps are lighted up, and when the engine is started, the lamps go out. During operation (engine running) If the engine lubricating oil pressure goes down during opera- tion, the engine lubricating oil pressure caution lamp and central warning lamp light up and the alarm buzzer sounds intermit- tently.
GK032094 At the same time, the top line of the character display displays “E03“ and the bottom line displays “CHECK RIGHT NOW“ and “CALL“ alternately for 3 seconds each, so stop the machine immediately in a safe place, stop the engine, and carry out inspection. WA470-6H – VEAM946100 3-17