Operation 3.2 Explanation of components 3. Engine coolant temperature caution lamp This lamp (3) lights up to warn the operator that the engine cool- ant water temperature has risen. During checks before starting (when the starting switch is turned to the ON position but the engine is not started), this monitor does not light up. During operation (engine running) If the engine coolant temperature rises, only the engine coolant water temperature caution lamp will light up. GK032100 If the coolant temperature rises further, the central warning lamp will light up and the alarm buzzer will sound intermittently.
At the same time as the central warning lamp lights up, the top line of the character display displays “E02“ and the bottom line displays “BRAKE OVERHEAT“, so stop the machine and run the engine under no load at a mid-range speed until the lamp goes out. 4. Hydraulic oil temperature caution lamp This lamp (4) lights up to warn the operator that the hydraulic oil temperature has risen. During checks before starting (when the starting switch is turned to the ON position but the engine is not started), this monitor does not light up.
During operation (engine running) If the hydraulic oil temperature rises, the hydraulic oil tempera- ture caution lamp, the central warning lamp will light up, and the alarm buzzer will sound intermittently. GK043105 At the same time, “E02“ is displayed on the top line of the char- acter display and “HYD OVERHEAT“ is displayed on the bottom line. Stop the machine and run the engine under no load at a mid-range speed until the lamp goes out. 5. Fuel level caution lamp This lamp (5) lights up if the amount of fuel remaining in the fuel tank goes below 35 liters (9,25 US gal). If it lights up, check and add fuel as soon as possible. For details, see "Check fuel level, add fuel (3-97)".
REMARK Even if the caution lamp lights up, action code “E02“ is not dis- played on the character display. GK032101 WA470-6H – VEAM946100 3-21