mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

Standard im Model lementation: June throuah Engine Engine End No. Seotember 1985 Vehicle ldent End No. transmission 201.024 102.961 201.024 @ 102.985 * not covered conrods are subject to additonal heat treatment to prevent Effective 09/89 all conrod distortion resulting in noises when the engine is operating at normal temperature. Reconditioning conrod bolts, replace if necessary (03-310). 1 Check conrod bearing cover. To perform the step, oil thread and bolt head contact surface and tighten to 30 + 5 Nm. 2 Install conrod bearing basic bore. If the basic bore exceeds the value of 51.619 mm or is conical, dress contact face of bearing cover on a surface plate to max. 0.02 mm.

3 Measure 030905-3135