8 Press in piston pin by hand. 9 Insert piston pin locking element into the groove. conrod bearing journals, 10 Oil cleaned cylinder bores, conrod bearing shells and pistons. I Install tensioning strap for piston rings and install piston into cylinder bore with arrow facing in direction of travel. I conrod with the code marks (arrows) aligned with each other and torque 12 Mount conrod bearing cover onto the conrod bolts to an initial torque of 30 Nm and angle of rotation torque of 90”. 13 Turn crankshaft and check clearance between piston pin boss and conrod. 03.0905 - 316ilO