mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

Notes Engine removed and disassembled. Main oil passage in crankcase open (01-130). Oil passages in crankcase and in crankshaft carefully cleaned. Crankshaft checked for cracks, hardness, dimensional tolerance and concentricity (03-318). Normal bearing shells and thrust washers are installed on the 3rd crankshaft bearing (thrust bearing). The thrust washers absorb the axial forces of the crankshaft. Q The thrust washers (23 and 23a) inserted in the crankcase and in the bearing cover on both sides are each identical. The thrust washers each have two retaining lugs in the bearing cover as an anti-twist lock and to avoid assembly errors, the bottom lugs being fitted off-center.

In addition, all the thrust washers are chamfered at one end. When repairing crankshafts, the thrust bearing journals must be reground in the width to one of the dimensions stated in the table (Section “Data”). 23 ?I 23 Q 24 1 cb 24a b 23a versm) 3a Ml 1 x 62 collar bolts (2nd version) 4b Washer 23 Thrust washer in crankcase 23a Thrust washer in bearing cover 24 Bearing shell in crankcase 24a Bearing shell in beating cover 1 Crankshaft 2 Bearing cover 3 M 12 x 60 bolts (1 St 03.0905 - 32Oi5