5 Pull off crankshaft gear and oil pump drive sleeve with the puller 102 589 05 33 00. 6 If the crankshaft gear is replaced, transfer color marking from the old to the new crankshaft gear. 7 Install crankshaft gear onto crankshaft. If this proves difficult, knock in with the impact drift 116 589 07 15 00. Pay attention to the straight pin for locating, when performing this step. 8 Insert drive sleeve. PO3.2035-13 I 9 Insert tensioning rail. On engines with double roller chain, insert tensioning rail and knock in new bearing pin as far as the stop. 10 Install camshaft gear (pay attention to color marking), tightening torque 80 Nm. 11 Check for leaks with engine running. 03.0905 - 35014