mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

03-430 Replacing ring gear on flywheel Preceding work: Removing flywheel (03-410). 16 PO3-0030 -3.5 Ring gear (17) . . . . . . . . . , . . . . . . * . . . . . Drill old ring gear and snap open with a chisel or heat rapidly and then remove immediately. Heat new ring gear to 220 and fit onto the flywheel immediately. Pay attention to instruction. Lateral runout at ring gear max. 0.4 mm. Flywheel (16) ................. . . . . . . Centering collar dia. (a) for ring gear 275,31 - 27539 mm. Clean contact surface of ring gear at flywheel before installation on ring gear. Flex plate (43) ................ . . . . . . This ring gear is welded on and cannot be replaced. Replace driven member complete.

Temperature measuring chalk Colour No. Commercial accessories e. g. AW Faber-Caste11 D-8504 Stein 2815/220 (white) Thermochrom bei Nurnberg 03.0905 - 430/l