05-211 Checking and replacement compensatlsn @lenlent of hydraulic valve clearance Preceding work: AN cleaner removed (09-400 and 09-410). Cylinder head cover removed (01-406). Check Cam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . position hydraulic element under test on the base circle. Load hydraulic element for approx. 5 to 10 seconds. If the element drops, remove it. To do this remove corresponding rocker arm bearing support (OS- 235). If a leaking hydraulic element is not found, check fitting position (OS- 214). Note When pressure testing the compensating elements, do not press valves against the piston crown (Numbers 1 and 2). 05.0906 - 211il