Note The fitting position of the hydraulic valve clearance compensating elements must be checked a) If there have been complaints of valve train noise and no malfunctions have been established when checking the compens- ating element in accordance with 05211. b) If valve timing parts, which are installed or mounted on the cylinder head (apart from the camshaft timing gear, valve guides, valve stem seals) have been renewed, or when valves and/or valve seat inserts have been machined. For testing, all timing parts located on the cylinder head must be installed correctly and working chamber of valve clearance compens- ating elements must be filled with engine oil.
The tests can also be carried out when the cylinder head is removed. To do this clamp cylinder head with four cylinder head bolts (arrows) on assembly board 102 589 00 59 00 (1). In this case turn the camshaft on rear flats with a fork wrench (24 mm). PO5- 2034-13 05.0906 - 214/4