mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

Note The valve stem seals including assembly sleeves are supplied in the repair set. Since September 1988 standardized valve stem seals in Viton (formerly Polyacrylic) are installed for intake and exhaust valves. The valve stem seals must not be interchanged due to the different inside 0. Distinguishing features: Intake valve stem seal (48) Chamfer (arrow) relieved d = 7.3 mm Wire ring : phosphated (black) Color: brown PO5 -0041-13 Exhaust valve stem seal (49) Chamfer (arrow) inclined d = 8.2 mm Wire ring : bright galvanized (yellow) Color: brown -d-’ PO5 -0040 -13 Valve guides, which are opened out at the retaining groove for the valve stem seal, must be replaced.

When installing the valve stem seal on the intake valves it is absolutely essential that the plastic sleeve, which is enclosed in the repair set, is placed on the valve stem, because without the sleeve damage to the sealing lip of the valve stem seal is unavoidable. 05 0906 - 270/2