mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

Checking and machining 1 Clean valves and carry out visual inspection. Valves with burnt valve heads with insufficient valve head height h and with worn or scored valve stem are to be replaced. PO50035-l 3 2 Measure valve stem eccentricity. Replace valve when an eccentricity of more than 0.03 mm is measured. 3 Machine valve seat. Note operating instructions of the machining equipment and adjustment angle 45 + 15’. 4 Measure valve seat eccentricity and valve head height Replace valve if the limit values are reached. 05.0906 - 28014