05290 eplacing valve seat ring 1 PO5-0052-35 Valve seat ring (52 and 53) . . . . . . . . . . . . . . . . unscrew with seat ring turning tool Note turning tool operating instructions. Valve guides (54 and 56) Base bore (D2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . measure. Note A new valve seat ring with normal dimensions can be used, when specified overlap is present. If minimum overlap is not achieved, machine base bore for valve seat ring. . check, replace if necessary (05-285). Machined base bore . . . . . . . . . . . . . . . . . . . . measure. Valve seat ring repair stage . . . . . . . . . . . . . . . .
skim, so that the specified overlap is achieved. Cylinder head (1) . . . . . . . . . . . . . . . . . . . . . . . heat up in water bath. Valve seat ring . . . . . . . . . . . . . . . . . . . . . . . . . Super cool with liquid nitrogen and stamp with a suitable mandrel. Machine valve seat (05-291). 05.0906 - 290/l