mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

Setbolt (37) with locking spring (38) ......... press out of chain tensioning casing in the direction of pressure. Check individual parts for wear (Number 6). Chain tensioner casing (36) . . . . . ......... screw into cylinder crankcase, 15 Nm (Number 7). Setbolt (37) with locking spring (38) ......... push in (Number 8). Sealing plug (40) with compression spring (39) and new sealing ring (41) . . . . . . . . . . . . . . . . . screw in, 70 Nm (Number 9). Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . mount (Number 10). \/belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . assemble (13-342). When engine is running . . . . . . . . . . . . . . . . . . .

check for leakage. Special tools Conventional tool Stud driver insert 17 mm, e.g. Hazet, D-5630 Remscheid Part No. l/2” square 985/l 7 Note The housing (36) of valveless, hydraulic lock chain tensioner is bolted to the crank case (1). The application force required to tension the chain is comprised of the force from compres- sion spring (39) and oil pressure in the chain tensioner, depending on engine oil pressure. 41 1 4 0 a 3 9 38 36 37 PO5-0070- 05.0906 - 31012