mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

Removal and installation 1 Removal and installation of Poly V- belt (13-342). 2 Loosen lower bolt (49) for alternator positioning. (51), swing alternator outwards (arrow). 3 Remove upper bolt 4 Unscrew sealing plug (40) and sealing ring (41) and remove compression spring (39). Caution! Sealing plug is pressurized by the compression spring. 5 Unbolt chain tensioner case (36) from the cylinder crankcase with the stud driver insert. 6 The chain tensioner must be stripped down before assembly. To do this press the setbolt (37) and locking spring (38) out of chain tensioner casing (36) in the direction of the arrow. Clean parts and check for wear. POS-2080-13 05.0906 - 31014