Lines, hoses and engine mounts Engine with transmission . . . . . . . . . . . . . . . . . . . . . . . . examine for signs of wear, replace if necessary. Examine antifreeze protection, adjust to correct level if necessary. Test leaktightness. . lift out, insert (step 52). Viscosity grades for engine oils according to SAE In accordance with ambient temperatures would result in frequent oil changes. Consequently, the temperature ranges are merely guidelines, which can be exceeded in the upper or lower limits for brief periods. In moderate climatic zones SAE 30 may be used from the spring on for all engine models.
SAE Adhering to the SAE grades low-40 or SAE low-50 may be used as an all-seasons oil for all gasoline engines. Refer to the most current “Factory Approved Service Products” for further information regarding specified viscosity grades and approved engine oils. Oil capacity in liters (refer to Factory Approved Service Products for approved engine oils) Engine (total capacity when refilling) 5.5 Engine capacity when changing oil and filter 5.0 01.0904 - 030 3