mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

6 Pull out the released end of the old timing chain evenly, to correspond with drawing on the new timing chain. Caution! The timing chain must remain engaged while turning the camshaft timing gear and crankshaft gear. 7 Secure the ends of the chain to the camshaft timing gear with wire. Detach old timing chain and connect the ends of the new timing chain with the repair connector link. Note Connector link must be inserted from behind. 8 Fit riveting set 103 589 01 63 00 to the basic tool 000 589 43 00 corresponding to the timing chain design (single or double roller chain). 9 Put loosely attached exterior bracket of the connector link in the press tool (arrow).

The exterior bracket is held magnetically. POS-2053-13 10 Put press tool on the connector link and press on bracket up to the stop. Note Put on clip so that both rivet pins engage. 05.0906 - 320/5