Installation instruction Adjust oil level of power steering to correct level. When engine is running, top off oil to the marking. Turn steering several times from full left to full right lock. Oil level when oil at normal operating temperature (approx. 80 - 26 mm below the top edge of reservoir. Oil level when oil cold (room temperature, approx. 20 “C) between Min. and Max. markings. 18 29 On models with AC compressor, remove poly V-belt, install (13-342). 30 Remove and install tensioning device for V-belt (13-345). 31 Unbolt belt pulley for high pressure pump of power steering, bolt on (arrows). 32 Unbolt strut (145) for high pressure oil pump and AC compressor (arrows), bolt on.
Tightening torque 25 Nm. 01.0904 030812