mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

01-140 Replacing core plug in crankcase PO1 -2073-13 PO,-2072-n Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........... drain completely, pour in (20-010). remove, install. Components which restrict access Core plug (4) .......................... remove. Position a chisel with narrow blade or a screwdriver in the deep-drawn edge of the plug (step 3). Carefully knock in plug on one side far enough for it to turn through its own longitudinal axis (approx. go”), and pull out with the pliers (step 4). Sealing surface in crankcase . . . . . . . . . . . . . . . Thoroughly clean of residues. The sealing surface must be free of grease. New core plug .........................

install. Coat sealing surface with the sealant Loctite 241, 002 989 94 71. Note curing time of approx. 45 minutes (step 6). Knock in core plug with the matching mandrel (step 7). Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . run until warm and check leaktightness. 01.0904 - 14011