6 Remove two bolts at the transmission - engine joint (MlO, arrows), bolt on. Tightening torque 45 Nm. 7 Remove both bottom mounting fixture, bolt on. 45 Nm. bolts (22) for engine Tightening torque Len side shown 8 Raise engine with the engine hoist. 9 Remove remaining bolts (32, 34) for attaching oil pan, bolt on and remove oil pan. Tightening torque: M6 10 Nm, M8 25 Nm. 10 Carefully clean mating face at oil pan and on crankcase. 01.0904 - 310/5