mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

26 Remove cylinder head bolts in stages in the reverse order of the tightening diagram with the torque wrench insert 617 589 00 10 00 with engine cold. Pal-0094-33 27 Remove cylinder head (51). 28 Clean mating faces on cylinder head and crankcase. 29 Replace cylinder head gasket. 30 Check the shaft length of the cylinder head bolts. If the maximum length (L) of 122 mm is exceeded, the bolts should be replaced with new ones. 31 Oil thread and head contact face of cylinder head bolts and insert. 01 0904 - 41519