mercedes-benz — Mercedes-Benz of North America, Inc. Service Manual 1993

Valve clearance to cylinder head mating face Commercial tools Surface grinding machine with milling device for light alloy surfaces. e. g. Sceledum, Type RTY Messrs. Roaro u. Fi. Schioiltaly Knife-edge straightedge approx. 500 mm long e. g. Messrs. Roaro u. Fi. Schioiltaly Note Only machine cylinder head mating face if there are porous or damaged areas. Caution! Clamp cylinder head absolutely flat for facing. Failure to observe this instruction may result in the camshaft jamming when the cylinder head is reinstalled. In this case, the cylinder head must be replaced. Facing 1 Face cylinder head mating face.

2 Remachine valve seats far enough for the minimum distance “A” to be achieved (05291 3 Check timing (05-215). 1 at a PO5-0055-13 01.0904 - 41812 Engines 102.961 @ as of 1984 Minimum clearance “A” with new Inlet (172) valve seats and valves Exhaust (173) 1.2 0.5 Maximum clearance “A” with Inlet (172) machined valve seats and reground Exhaust (173) valves 2.1 1.4