As demand for system oil increases, discharge pres- sure will decrease moving pressure compensator valve (D) away from spring (8). System oil will no longer be routed to the crankcase. This will decrease crankcase pressure (L) as crankcase oil passes through the small orifice into inlet oil (M). Pump piston springs will overcome the decreased pressure in the crankcase and pistons will again come in contact with pump shaft bearing race. A sudden demand for system oil will cause pressure compensator valve (0) to move rapidly downward. Valve (F) and spring (G) acts like a shock absorber dampening the movement of the pressure compensa- tor valve.
Therefore, valve movement will not be influenced by periodic pressure spikes. Litho in U.S.A. 115-7 CTM-7 (5-89) 2Rl; 115 07 110589 R70;070300 956 050288 3000 Series (HPR)-Operation and Tests When system pressure is reached, the pump DE- STROKES. The pressure compensator valve will be in the second position (0). Discharge pressure oil is routed through valve (D) into crankcase cavity. Crank- case pressure increases overcoming the combined spring force on the pump pistons. Pump pistons then are held away from pump shaft bearing race by increased crankcase pressure. The pump shaft contin- ues to rotate, but pistons do not move.
QUICK OESTROKE OVERSHOOT is shown when the pressure compensator valve is in third pOSition (P). During quick destroke, the pressure compensator valve moves far enough allowing discharge pressure oil to be routed to both crankcase and inlet oil and also allowing crankcase oil to feed into inlet oil. This limits high pressure spikes caused by discharge pressure oil being routed too rapidly into crankcase cavity. AllTractorManuals.com