Charge-Air Piping C8.3 Industrial Page 5-6 Section 5 - Maintenance Procedures at 250 Hours or 3 Months Operate the engine at low idle to inspect for leaks at the lubricating oil filter and the drain plug. Stop the engine. Wait approximately 15 minutes to let the lubricating oil drain from the upper parts of the engine. Check the level again. Add oil as necessary to bring the oil level to the H (high) mark on the dipstick. Charge-Air Cooler Maintenance Check Inspect the charge-air cooler (CAC) for dirt and debris blocking the fins. Check for cracks, holes, or other damage. If damage is found, refer to the vehicle, vessel, or equipment manufacturer.
Charge-Air Piping Maintenance Check Inspect the charge-air piping and hoses for leaks, holes, cracks, or loose connections. Tighten the hose clamps if necessary. Refer to the vehicle or equipment manufacturer's specifications for the correct torque value.