C8.3 Industrial Coolant Filter Section 7 - Maintenance Procedures at 500 Hours or 6 Months Page 7-1 Maintenance Procedures - Overview General Information All maintenance checks and inspections listed in previous maintenance intervals must also be performed at this time, in addition to those listed under this maintenance interval. Coolant Filter Remove WARNING Do not remove the pressure cap from a hot engine. Wait until the coolant temperature is below 50°C [120°F] before removing the pressure cap. Heated coolant spray or steam can cause personal injury Turn the shutoff valve to the OFF position by rotating the knob from vertical to horizontal in the direction shown.
Remove and discard the coolant filter. Clean Clean the gasket surface.