Cummins — 4021330

C8.3 Industrial Troubleshooting Symptoms Charts Section TS - Troubleshooting Symptoms Page TS-27 Engine Power Output Low Cause Correction STEP 1 Fuel level is low in the tank ............. Fill the supply tank. Refer to the OEM service manual. OK Go To Next Step Engine power decreases above recommended altitude. Refer to the Engine Data Sheet for specifications. STEP 2 Engine is operating above recommended altitude ............. OK Go To Next Step STEP 3 Throttle linkage adjustment is not correct ............. Check the fuel pump throttle linkage adjustment. Refer to the OEM service manual. OK Go To Next Step STEP 4 Fuel shutoff lever (mechanical) partially engaged .............

Check or replace shutoff lever in run position. OK Go To Next Step Check the intake and exhaust systems for restrictions. Inspect the intake air filter and replace as necessary. STEP 5 Intake and exhaust system restricted ............. OK Go To Next Step Check the air intake system for restriction. Clean or replace the air filter and inlet piping as necessary. Refer to Procedure 010-058 (Air Intake Piping) in Section 6. STEP 6 Air intake system restriction is above specification ............. OK Go To Next Step Check for loose or damaged piping connections and missing pipe plugs. Check the turbocharger and exhaust manifold mounting. Refer to the OEM service manual.

STEP 7 Air intake or exhaust leaks ............. OK Go To Next Step STEP 8 Air leak between the turbocharger and the intake ............. Check for leaks in the air crossover tube, charge air cooler connections, hoses, or through holes in the manifold cover and repair or replace if necessary. Refer to the OEM service manual. manifold OK Go To Next Step STEP 9 Fuel leak ............. Check the fuel lines, fuel connections, and fuel filters for leaks. Check the fuel lines to the supply tanks. Refer to the OEM service manual. OK Go To Next Step