Cummins — 4021330

Troubleshooting Symptoms Charts C8.3 Industrial Page TS-62 Section TS - Troubleshooting Symptoms Smoke, White — Excessive Cause Correction STEP 1 Starting procedure is not correct ............. Verify the correct starting procedure. Refer to Procedure 101-014 (Normal Starting Procedure) in Section 1. OK Go To Next Step STEP 2 Engine is cold ............. Allow the engine to warm to operating temperature. If the engine will not reach operating temperature, refer to the Coolant Temperature Below Normal symptom tree. OK Go To Next Step Check the winterfront, shutters, and under-the- hood air. Use under-the-hood intake air in cold weather.

Refer to Procedure 101-004 (Cold Weather Starting) in Section 1. STEP 3 Engine is operating at low ambient temperature ............. OK Go To Next Step STEP 4 Starting aid is malfunctioning ............. Check for correct operation of cold-starting aid. Refer to OEM service manual. OK Go To Next Step STEP 5 Coolant temperature is below specification ............. Refer to the Coolant Temperature is Below Normal symptom tree. OK Go To Next Step STEP 6 Fuel grade is not correct for the application or the Operate the engine from a tank of high-quality fuel. Refer to Procedure 018-002 (Fuel Recommendations and Specifications) in Section V. fuel quality is poor .............

OK Go To Next Step Check for loose or damaged piping connections and missing pipe plugs. Check the turbocharger and exhaust manifold mounting. Refer to OEM service manual. STEP 7 Air intake or exhaust leaks ............. OK Go To Next Step Check for loose or damaged piping connections and missing pipe plugs. Check the turbocharger and exhaust manifold mounting. Refer to OEM service manual. STEP 8 Air intake or exhaust leaks ............. OK Go To Next Step