Cummins — 4021330

Tap-Drill Chart - U.S. Customary and Metric C8.3 Industrial Page V-24 Section V - Maintenance Specifications Tap-Drill Chart - U.S. Customary and Metric General Information NOTE ON SELECTING TAP-DRILL SIZES: The tap drill sizes shown on this card give the theoretical tap drill size for approximately 60% and 75% of full thread depth. Generally, it is recommended that drill sizes be selected in the 60% range as these sizes will provide about 90% of the potential holding power. Drill sizes in the 75% range are recommended for shallow hole tapping (less than 1 1/2 times the hole diameter) in soft metals and mild steel.