Normal Starting Procedure C8.3 Industrial Page 1-2 Section 1 - Operating Instructions Do not operate a diesel engine where there are or can BE COMBUSTIBLE vapors. These vapors can be sucked through the air intake system and cause engine acceleration and over speeding that can result in a fire, an explosion, and extensive property damage. Numerous safety devices are available, such as air intake shutoff devices, to minimize the risk of over speeding where an engine, due to its application, is operating in a combustible environment, such as due to a fuel spill or gas leak. Remember, Cummins Inc. has no way of knowing the use you have for your engine.
The equipment owner and operator ARE responsible for safe operation in a hostile environment. Consult A Cummins® Authorized Repair Location for further information. WARNING CAUTION Do not expose the engine to corrosive chemicals. Corrosive chemicals can damage the engine. Cummins recommends the installation of an air intake shutoff device or a similar safety device to minimize the risk of overspeeding when an engine is operating in a combustible environment, such as due to a fuel spill or gas leak. Normal Starting Procedure General Information Industrial Applications If ambient temperature is below 16°C [60°F], reference the following procedure. Refer to Procedure 101-004 in Section 1.