Electronic Controlled Fuel System C8.3 Industrial Page 1-16 Section 1 - Operating Instructions Engine Monitoring System General Information The indicator symbols (1) provide additional information on the type of fault that the ECM has detected. The individual symbols will flash during a fault condition. NOTE: Pressing the alarm cancel button (6) when the keyswitch is turned on will illuminate the symbols for a self-test. Low Engine Oil Pressure The low engine oil pressure lamp (7) comes on when the engine oil pressure is below specification. Use the following procedure for lubricating oil specifications.Refer to Procedure 018-017 in Section V.
High Intake Manifold Temperature The high intake manifold temperature lamp (1) comes on when the intake manifold temperature is above specification. The high engine oil temperature lamp (2) comes on when the engine oil temperature is above specification. High Engine Oil Temperature