Ch 2 page 133 TRANSMISSION Legend: 1 = O-ring 158x3 2 = Piston 3 = End plate 4 = Inner clutch disk 10x 5 = Outer clutch disk 10x 6 = End plate 7 = Snap ring 8 = Cup spring set 9 = Baffle plate 10 = Snap ring A85 11 = O-ring 95x3 12 = O-ring 100x3 13 = Disk carrier Figure 376 Preload the baffle plate with cup spring set until the snap ring (1) can be engaged into the groove. (S) Assembly fixture 850317-00080 Figure 377 Assemble the end plate (1). Alternately assemble 10 pcs. of inner clutch discs (1) and 10 pcs. of outer clutch discs (2 ) into the disc carrier (3). Figure 378 Starting with an inner clutch disc!
Coated side of the inner and outer clutch discs must always be installed showing to the piston! Depending on the parts list version, a disc arrangement with 9 inner and outer discs may be installed! Please refer to the relating spare parts list to see the installed disc arrangement! See (Figure 376)! Figure 379 SHOP MANUAL CAUTION