Ch 2 page 161 TRANSMISSION Legend: 1 = O-ring 158x3 2 = Piston 3 = End plate 4 = Inner clutch disc 8x / 10x 5 = Outer clutch disc 8x / 10x 6 = End plate 7 = Snap ring 8 = Cup spring set 9 = Baffle plate 10 = Snap ring A85 11 = O-ring 95x3 12 = O-ring 100x3 13 = Disc carrier Figure 485 Preload the baffle plate with cup spring set until the snap ring (1) can be engaged into the groove. (S) Assembly fixture 850317-00080 Figure 486 Assemble the end plate (1). Figure 487 Alternately assemble HA30F=8 pcs./ DA40F=10 pcs of inner clutch discs (1) and HA30F=8 pcs./ DA40F=10 pcs . of outer clutch discs (2 ) into the disc carrier (3). Starting with an inner clutch disc!
Coated side of the inner and outer clutch discs must always be installed showing to the piston! See (Figure 485)! Figure 488 SHOP MANUAL CAUTION