TRANSMISSION Ch 2 page 186 NOTE Installation of the clutches by means of the mounting device is described in (Figure 579) - (Figure 581) Due to the installation circumstances it is not possible to install single clutches without using the special tool. In case of inadequate procedure there is a risk of injury! Install all clutches on the mounting device II until contact. Press all locating bushes inward (see arrow). (S) Mounting device II 850317-00077 For installation position of the different clutches please refer to the respective Chapter “Reassembly clutches“! Figure 579 Install the mounting device I until contact and lock all clutches by means of the knurled nuts.
(S) Mounting device I 850317-00077 Figure 580 Install clutches in housing II until contact. Loosen the knurled nuts and remove mounting device I. Figure 581 SHOP MANUAL WARNING