TRANSMISSION Ch 2 page 190 Fasten the suction tube (1) by means of the cylindrical screws (2) in housing I. Tightening torque (M8/8.8x16) MA = 23 Nm Figure 593 Mount O-rings 11x3 (1) onto the connection socket of the tube and grease them. Figure 594 Install the tube in housing I until contact and fasten it by means of cylindrical screws. Tightening torque (M8/8.8x16) MA= 23 Nm Figure 595 Cable with fastening parts. 1 = Cable Ergopower L II 2 = Fixing plate with cylindrical screws 3 = Clip with cylindrical screw Figure 596 SHOP MANUAL