Ch 2 page 195 TRANSMISSION Lock the clamping plate with cylindrical screws (1). Tightening torque (M6/8.8x12) MA = 9.5 Nm Install the temperature sensor (oil sump) with O-ring 9.5x2 (2). Tightening torque (M12x1.5) MA = 23 Nm Figure 610 Valve block 1 = Cooler changeover valve 2.7 bar 2 = Converter pressure back-up valve 4.5 bar 3 = Retarder valve 2.5 bar 4 = Main pressure valve 16+2 bar 5 = Converter safety valve 12 bar Figure 611 Push components of the converter pressure back-up valve into the bore. 1 = Piston 2 = Compression spring 3 = Valve bush Figure 612 Preload the converter pressure back-up valve by means of a suitable pressure piece and fasten it with the fixing plate (1).
Figure 613 SHOP MANUAL