TRANSMISSION Ch 2 page 214 By means of the lifting tackle insert the preassembled planet carrier with ring gear into the cover until contact. (S) Eyebolt 850317-00070 Figure 686 NOTE Setting of disc clearance = 3.2 ... 4.8 mm Install disc package. NOTE To ensure a correct measuring result, install disc package without oil for the time being! The number and arrangement of discs is indicated in the respective spare parts list. Figure 687 Insert the end plate (1) and axially fix it with the snap ring 354x3,2 (2). Figure 688 Press on end plate with approx. 100 N (10 kg) and set dial indicator to „zero“.
Then press end plate against snap ring (upwards) and read disc clearance on the dial indicator. In case of deviations from the required disc clearance, correct with appropriate outher clutch disc. After having set the disc clearance, remove the disc package. Oil discs acc. to ZF list of lubricants TE-ML 03. Reinstall the disc package. Figure 689 SHOP MANUAL