Ch 2 page 227 TRANSMISSION Install speed sensors with fixing plate (1) to the valve block until contact and fasten it with the torx screws (2). Tightening torque (M6/10.9x50) MA = 9.5 Nm Figure 733 Fasten the speed sensor (2) to the fixing plate (3) with the cylindrical screw (1). Tightening torque (M6/8.8x12) MA = 9.5 Nm Legend speed sensor: 2 = Speed sensor – n3 secondary step Figure 734 Install speed sensor with fixing plate (1) to the transmission housing until contact and fasten it with the cylindrical screws (2 and 3). 2 = Tightening torque (M6/8.8x12) MA = 9.5 Nm 3 = Tightening torque (M6/8.8x35) MA = 9.5 Nm Figure 735 Install seal (1) until contact. Figure 736 SHOP MANUAL